Wholesale of Glass Partition Walls

Glass partition wallThere are many types and combinations to meet different design needs.Glass partitionwall is a combination of glass panels joined almost directly together. There are several ways to connect glass panels:

　　1. Connecting with cylindrical bars with a diameter of 10mm: this is also a rare connection method, where the cylindrical bars are embedded into the glass by arc processing of the glass side.

　　2. Directly connecting with adhesive strips: in general, the adhesive strips are semi-transparent with a thickness of 1mm-2mm. For a 12mm thick glass partition wall, 8mm wide adhesive strips should be used, while for a 10mm thick glass, 6mm wide adhesive strips should be used.

　　3. Connecting with a cross-shaped column: the glass panel of the glass partition wall is grooved on the side and embedded with a cross-shaped column, which gives a beautiful and textured appearance.

　　4. Connecting with a 10mm*10mm square tube: this is an installation method for glass partition walls, where the glass panels are connected using the flat surface of the square tube with a 1mm thick adhesive strip between the glass and the tube.

　　5. Connecting with a shaped bar: this can also be considered a connection method for glass partition walls, as the shaped bar has an exterior width of 10mm and the completed wall almost presents a panoramic effect. Double-sided adhesive strips are used to connect the glass to the inner groove of the shaped bar.